SBC-GX1 Technical Manual General Software Embedded BIOS 2000
Shadow configuration setup screen
This screen lets you enable and disable the shadowing of areas of ISA ROM regions.
Normally shadowing should be enabled at E000-F000 to maximize system ROM BIOS
performance, and any other region that a ROM BIOS extension may be executed from.
These settings are entered into the following screen:
System BIOS Setup - Shadow/Cache Configuration
(C) 2001 General Software, Inc. All rights reserved
Shadowing :>Chipset Shadow 16KB ROM at C000 : Enabled
Shadow 16KB ROM at C400 : Enabled Shadow 16KB ROM at C800 : Enabled
Shadow 16KB ROM at CC00 : Disabled Shadow 16KB ROM at D000 : Disabled
Shadow 16KB ROM at D400 : Disabled Shadow 16KB ROM at D800 : Disabled
Shadow 16KB ROM at DC00 : Disabled Shadow 16KB ROM at E000 : Enabled
Shadow 16KB ROM at E400 : Enabled Shadow 16KB ROM at E800 : Enabled
Shadow 16KB ROM at EC00 : Enabled Shadow 64KB ROM at F000 : Enabled
Ç/È/Æ/Å/<CR>/<Tab> to select or <PgUp>/<PgDn>/+/- to modify
<Esc> to return to main menu
© 2004 Arcom Issue D 51
To Next Page
Loading...
Need help?
General
