SBC-GX1 Technical Manual General Software Embedded BIOS 2000
Field Explanation
Show “Hit Del”
Determines whether the prompt to ‘Hit Del for setup’ is displayed
during the POST.
Config Box
Determines whether the configuration screen is displayed at the
end of the POST.
F1 Error Wait
If enabled, the BIOS pauses during the POST process if it
encounters an error. A message is displayed indicating what the
error is. The user must press F1 to proceed.
Parity Checking
Not currently used.
Memory Test Tick
Speaker produces a ticking noise during memory test routine,
when enabled.
Debug Breakpoints
If enabled, the Embedded BIOS responds to breakpoints.
Debug HEX Case
Used to set the default text in the Embedded BIOS debugger to
upper case or lower case characters.
Memory Test
Used to select the type of memory test run during the POST
process. You may want to choose different options to test style for
the lower and upper memory regions. The options available are:
StdLo FastHi (the default setting), StdLo StdHi, StdLo FullHi,
FullLo FastHi, FullLo StdHi, FullLo FullHi, FastLo FastHi, FastLo
StdHi, and FastLo FullHi.
© 2004 Arcom Issue D 48
To Next Page
Loading...
Need help?
General
