This counter is only credited when the measured medium is flowing in the
chosen positive direction. In case the flow is 0, or if it is flowing in the
opposite (negative) direction, the number on the counter remains the same.
This counter works the same way as the positive volume counter, yet in the
opposite direction. In case the flow is 0, or flowing in the designated positive
direction, the number on this counter will remain the same.
This is a 2nd total volume counter. It works the same as the Total Volume
positive counter, yet with the only difference being that it can be reset to 0 at
any time, with User Settings password.
This item is a temperature indication for the measured medium.
Represents actual flowrate in a proportion to Qn (100%). The Qn – maximal
flow value can be changed in User Settings.
Shows last 2minutes of actual flow in time based graph (1 second step).
Maximum of the graph is Qn value, can be changed in User Settings.
External Measurements - Temperature
This item is a temperature measured by the connected external temperature
sensor.*
*External Measurement Temperature module must be used.
To Next Page
Loading...