Arkon MAGX2 - Page 16

MAGX2 User Guide
15
V2.14 1-2-2017
External Measurements - Pressure
This item is a pressure measured by the connected pressure sensor.*
*External Measurement Pressure module must be used.
You can cycle through these 9 indication screens by pressing the up and down buttons on the transmitter.
It is possible to change the number
of decimal digits of the actual flow
displayed in the main screen:
decimal numbers 
By using the  buttons
If value of any Volume counter higher than 4 000 000 m3, then value of Volume show only in
m3 unit. If value of any Volume counter higher than 999 999 999 m3, then this Volume will be
reset to 0.