System Control
ARM DDI 0363G Copyright © 2006-2011 ARM Limited. All rights reserved. 4-12
ID073015 Non-Confidential
c7 0 c11 1 Clean data cache line by
physical address to
Point-of-Unification
Write-only - page 4-59
2-7 Undefined - - -
c12-c13 0-7
c14 0
1 Clean and invalidate data
cache line by physical
address to
Point-of-Unification
Write-only - page 4-59
c14 2 Clean and invalidate data
cache line by Set/Way
Write-only - page 4-59
3-7 Undefined - - -
c15 0-7
c8 0 c0-c15 0-7 Undefined - - -
c9 0 c0 0-7 Undefined - - -
c1 0 BTCM Region Read/write
-
d
page 4-61
1 ATCM Region Read/write
-
d
page 4-61
2-7 Undefined - - -
c2 0 TCM selection Read/write
0x00000000
page 4-63
1-7 Undefined - - -
c3-c11 0-7
c12 0 Performance Monitor
Control
Read/write
0x41141800
page 6-7
1 Count Enable Set Read/write Unpredictable page 6-8
2 Count Enable Clear Read/write Unpredictable page 6-9
3 Overflow Flag Status Read/write Unpredictable page 6-11
4 Software Increment Write-only - page 6-12
c9 0 c12 5 Performance Counter
Selection
Read/write Unpredictable page 6-13
6-7 Undefined - - -
c13 0 Cycle Count Read/write
0x00000000
page 6-13
1 Event Select Read/write Unpredictable page 6-14
2 Performance Monitor
Count
Read/write
0x00000000
page 6-15
3-7 Undefined - - -
Table 4-2 Summary of CP15 registers and operations (continued)
CRn Op1 CRm Op2 Register or operation Type Reset value Page
To Next Page
Loading...
