34 | Instant User Interface Aruba Instant 6.5.0.0-4.3.0.0 | User Guide
l Noise (dBm)—Noise floor of the channel.
An edit link is displayed on clicking the IAP name. For details on editing IAP settings, see Customizing IAP
Settings on page 68.
Clients Tab
This tab displays a list of clients that are connected to the Instant network. The client names are displayed as
links. The expanded view displays the following information about each client:
l Name—Username of the client or guest users if available.
l IP Address—IP address of the client.
l MAC Address—MAC address of the client.
l OS—Operating system that runs on the client.
l ESSID—ESSID to which the client is connected.
l Access Point—IAP to which the client is connected.
l Channel—The client operating channel.
l Type—Type of the Wi-Fi client.
l Role—Role assigned to the client.
l Signal—Current signal strength of the client, as detected by the IAP.
l Speed (mbps)—Current speed at which data is transmitted. When the client is associated with an IAP, it
constantly negotiates the speed of data transfer. A value of 0 means that the IAP has not heard from the
client for some time.
Links
The following links allow you to configure various features for the Instant network:
l New Version Available
l System
l RF
l Security
l Maintenance
l More
l Help
l Logout
l Monitoring
l Client Match
l AppRF
l Spectrum
l Alerts
l IDS
l AirGroup
l Configuration
l AirWave Setup
l Pause/Resume
Each of these links is explained in the subsequent sections.
To Next Page
Loading...
