Configuration Steps CLI Commands UI Procedure
(Instant AP)(Access Rule "wireless-ssid")# rule any
any match any any any permit
NOTE: Ensure that you execute the commit apply command in the Instant CLI before saving the configuration and
propagating changes across the IAP cluster.
Table 84: IAP Configuration for Scenario 1—IPsec: Single Datacenter Deployment with No Redundancy
IAP-Connected Switch Configuration
Client VLANs defined in this example must be opened on the upstream switches in multiple IAP deployments,
as client traffic from the slave to the master is tagged with the client VLAN.
Datacenter Configuration
For information on controller configuration, see Configuring a Controller for IAP-VPN Operations on page 247.
Ensure that the upstream router is configured with a static route pointing to the controller for the L3 VLAN.
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide IAP-VPN Deployment Scenarios | 400
To Next Page
Loading...
