Aruba RAP-155 - NAI Realm Profile Configuration Parameters

375 | Hotspot Profiles Aruba Instant 6.5.0.0-4.3.0.0 | User Guide
You can specify any of the following EAP methods for the nai-realm-eap-method <eap-method> command:
l identity—To use EAP Identity type. The associated numeric value is 1.
l notification—To allow the hotspot realm to use EAP Notification messages for authentication. The
associated numeric value is 2.
l one-time-password—To use Authentication with a single-use password. The associated numeric value is 5.
l generic-token-card—To use EAP Generic Token Card (EAP-GTC). The associated numeric value is 6.
l eap-tls—To use EAP-Transport Layer Security. The associated numeric value is 13.
l eap-sim—To use EAP for Global System for Mobile Communication (GSM) Subscriber Identity Modules
(SIM). The associated numeric value is 18.
l eap-ttls—To use EAP-Tunneled Transport Layer Security. The associated numeric value is 21.
l peap—To use protected Extensible Authentication Protocol. The associated numeric value is 25.
l crypto-card—To use crypto card authentication. The associated numeric value is 28.
l peapmschapv2—To use PEAP with Microsoft Challenge Handshake Authentication Protocol version 2
(MSCHAPv2). The associated numeric value is 29.
l eap-aka—To use EAP for Universal Mobile Telecommunications System (UMTS) Authentication and Key
Agreement (AKA). The associated numeric value is 50.
The following table lists the possible authentication IDs and their respective values:
Authentication ID
Authentication Value
reserved
l Uses the reserved authentication
method.
l The associated numeric value is 0.
—
expanded-eap
l Uses the expanded EAP authentication
method.
l The associated numeric value is 1.
Use expanded-eap as the authentication value.
non-eap-inner-auth
l Uses non-EAP inner authentication type.
l The associated numeric value is 2.
The following authentication values apply:
l reserved—The associated numeric value is 0.
l pap—The associated numeric value is 1.
l chap—The associated numeric value is 2.
l mschap—The associated numeric value is 3.
l mschapv2—The associated numeric value is 4.
Table 79: NAI Realm Profile Configuration Parameters