New Version Available
This link is displayed on the Instant main window only if a new image version is available on the image server
and AirWave is not configured. For more information on the New version available link and its functions, see
Upgrading an IAP on page 348.
System
This link displays the System window. The System window consists of the following tabs:
Use the Show/Hide Advanced option of the System window to view or hide the advanced options.
l General—Allows you to configure, view, or edit the Name, IP address, NTP Server, and other IAP settings
for the VC.
l Admin—Allows you to configure administrator credentials for access to the VC Management UI. You can
also configure AirWave in this tab. For more information on management interface and AirWave
configuration, see Managing IAP Users on page 143 and Managing an IAP from AirWave on page 305,
respectively.
l Uplink—Allows you to view or configure uplink settings. See Uplink Configuration on page 317 for more
information.
l L3 Mobility—Allows you to view or configure the Layer-3 mobility settings. See Configuring L3-Mobility on
page 338 for more information.
l Enterprise Domains—Allows you to view or configure the DNS domain names that are valid in the
enterprise network. See Configuring Enterprise Domains on page 196 for more information.
l Monitoring—Allows you to view or configure the following details:
n Syslog—Allows you to view or configure Syslog server details for sending syslog messages to the
external servers. See Configuring a Syslog Server on page 364 for more information.
n TFTP Dump—Allows you to view or configure a Trivial File Tranfer Protocol (TFTP) dump server for core
dump files. See Configuring TFTP Dump Server on page 365 for more information.
n SNMP—Allows you to view or configure Simple Network Management Protocol (SNMP) agent settings.
See Configuring SNMP on page 360 for more information.
l WISPr—Allows you to view or configure the Wireless ISP-roaming (WISPr) settings. See Configuring WISPr
Authentication on page 175 for more information.
l Proxy—Allows you to configure HTTP proxy on an IAP. See Configuring HTTP Proxy on an IAP on page 348
for more information.
l Time Based Services—Allows you to configure a time profile which can be assigned to the
SSIDconfigured on the IAP. See Configuring Time-Based Services on page 221
RF
The RFlink displays a window for configuring Adaptive Radio Management (ARM) and Radio features.
l ARM—Allows you to view or configure channel and power settings for all the IAPs in the network. For
information on ARM configuration, see ARM Overview on page 253.
l Radio—Allows you to view or configure radio settings for 2.4 GHz and the 5 GHz radio profiles. For
information on Radio, see Configuring Radio Settings on page 260.
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide Instant User Interface | 35
To Next Page
Loading...
