67 | Initial Configuration Tasks Aruba Instant 6.5.0.0-4.3.0.0 | User Guide
In the CLI
The following example enables the hashing of a management user password:
(Instant AP)(config)# hash-mgmt-password
(Instant AP)(config)# end
(Instant AP)# commit apply
The following example adds a management user with read-only privilege:
(Instant AP)(config)# hash-mgmt-user john password cleartext password01 usertype read-only
(Instant AP)(config)# end
(Instant AP)# commit apply
The following examples removes a management user with read-only privilege:
(Instant AP)(config)# no hash-mgmt-user read-only
(Instant AP)(config)# end
(Instant AP)# commit apply
To Next Page
Loading...
