TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
97
A.5.5 Remove a Headset
To remove a Bluetooth Headset enter in the handset menu, select "Bluetooth" >
"Headset". Step with the navigation key,
or to the headset to be removed and press the
soft key "More". Select "Delete". Confirm with the soft key "Yes".
A.5.6 Change the name of Bluetooth headset
The name, in the headset list, of the headset is the default name for the headset.
To change the name enter
in the menu, select “Bluetooth” > “Headset”. Step with the
navigation key,
or , select the headset. Select "More" > “Edit name”. See 2.5
Alphanumeric Keys on
page 13.
A.6 Calling
A.6.1 Make a Call
Dial the number on the handset and press the soft key "
Call", or the Off-hook key. When
“Transfer call to phone?” is displayed press "No" or ignore the message to use the Bluetooth
Headset. Press "Yes" to use the handset.
A.6.2 Answer a Call
A ring signal sounds in both the selected Bluetooth h
eadset and the handset to signal an
incoming call.
To answer the call in the Bluetooth headset, press the button on the headset.
To answer the call in the handset press the Off-hook key on the handset.
A.6.3 End a Call
To end the call press the button on the hea
dset or the On-hook key on the handset.
A.7 Volume and Mute Control
A.7.1 Adjust the Volume During a Call
Depending on the Bluetooth headset it might b
e possible to adjust the volume on the
headset*. On the handset press the upper Volume button on the upper left side to increase
the volume and the lower Volume button to decrease the volume in the headset.
A.7.2 Turn the Microphone On/Off During a Call
Mute the headset and the handset with the Sound off key on the handset. See 5.4.4 Turn
the Microphone On or Off during a Call on
page 28.
A.8 Messaging
When a text message is received during an ongoing call, a beep sounds in the Bluetooth
headset.
To Next Page
Loading...
Need help?
General
