ASCOM D62 User Manual

TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
96
A.4 Headsets
A number of Bluetooth headsets for different work situations have been tested together
with the handset. Refer to the Ascom Wireless Extranet Website for a list of verified
Bluetooth headsets.
Since the Bluetooth supports the Bluetooth 2.0 standard, other headsets may
also work
although not verified by Ascom.
Note: The Bluetooth headset
may have more or less functions than described here, refer to
the Manual for the Bluetooth headset.
A.5 Operation
Step between the menus with the navigation key . Confirm each menu selection by
pressing the Soft key "Select".
A.5.1 Enable Bluetooth
To enable the Bluetooth function enter
in the handset menu, select Bluetooth and
select “Enable”.
A.5.2 Pair and Connect a Bluetooth Headset
Before a headset can be used a connection (pa
iring) between the headset and the handset
must be established.
1 Place the Bluetooth headset and the handset next to each other.
2 Enable Bluetooth, see A.5.1Enable Bluetooth.
3 Put the Bluetooth headset in pairing mode, see the user manual for the Bluetooth
headset.
4 On the handset enter
in the menu, select “Bluetooth” > “Headset”, “Add new”.
A dialog "Put headset in Pair
ing mode" is displayed.
5 Press "OK". It now searches for a
Bluetooth headset to connect to.
6 When headset is found, press "Pair".
7 If needed, enter PIN code, see user manual for the Bluetooth headset
. Press "OK".
The dialog Succ
essful pairing appears if the pairing process was successful. The
Bluetooth headset is also connected and this is indicated by the icon
in front of the
headset.
A.5.3 Add another Bluetooth Headset
Up to eight headsets can be paired to the handset, but only one at a time can
be selected. To
pair another headset repeat section “Pair and Connect a headset” steps 1-6.
The paired headsets are displayed by a default name in t
he handset menu “Headset”. See
A.5.6Change the name of Bluetooth headset
A.5.4 Select a Bluetooth Headset
To activate a Bluetooth headset, enter
in the handset menu, select “Bluetooth” >
“Headset”. Step with the navigation key,
or to the headset to be selected and press the
soft key "Select", "Connection successful" is dis
played. The headset is now selected.
When a new headset has been selected any previous
headset is disconnected automatically.

ASCOM D62 Specifications

General

Brand	ASCOM
Model	D62
Category	Handsets
Language	English