AudioCodes 420HD - Defining Phone Keys as Paging Dials

420HD IP Phone for Microsoft Skype for Business
User's Manual 46 Document #: LTRT-11898
5.16 Defining Phone Keys as Paging Dials
You can define a phone key as a paging dial. This is done in the Speed Dial screen. You can
access this screen via
n
MENU key > Speed Dial
-OR-
n
Long-press a dialpad key (1-9) not yet defined as a Speed Dial
Note: Make sure the group paging feature is enabled – consult your IT Administrator.
Ø To define a phone key as a paging dial:
1. Access the Speed Dial screen as described above.
2. Select an Empty. You can select 1-9. This screen is displayed:
3. Navigate to Paging (use the right rim of the navigation control button):
4. Press the Select softkey; this screen is displayed:
5. In the 'Group Name' field, enter the name of the group, to be displayed in the phone's LCD
when there's an incoming / outgoing paging call.
6. Scroll down to the 'Multicast Address' field and enter the paging group's multicast IP
address. Default: 224.0.1.0. For phones to be in a group, all must be configured with the
identical multicast address.
7. Scroll down to the 'Multicast Port' field and enter the group's port. Default: 8888. For phones
to be in a group, all must be configured with the identical port.
8. Press the Save softkey; the key is defined as a paging dial.