AudioCodes 420HD - Pairing the BToE PC Application with the IP Phone; Generating a Pair Code

User's Manual 7. Performing Advanced Operations
Version 2.0.13 71 420HD IP Phone for Microsoft Skype for Business
16. From the AC BTOE TCP Port dialog that opens, configure the TCP Port:
Figure 7-17: AC BToE TCP Port
The valid range is 1 to 65535.
Ø To change the BToE TCP port on the IP phone side:
n
See the Administrator's Manual.
7.11.4 Pairing the BToE PC Application with the IP Phone
This section shows how to pair AudioCodes' BToE PC application with the IP phone using a pair
code. Pair like this:
1. Generate a pair code (see Section 7.11.4.1)
2. Connect the IP phone and BToE PC application using the pair code (see Section 7.11.4.2)
Note:
• In case of IP change you will need to generate pair code again.
• If you know the last pair code you do not need to generate a new one.
If you don't know it continue below.
7.11.4.1 Generating a Pair Code
This section shows how to generate a pair code.
Ø To generate a pair code:
1. On the IP phone, press the MENU key; the LCD displays the Menu screen.
2. Press the BToE softkey; the BToE pair code is displayed:
This is the pair code that will be used by the BToE PC application. Make a note of it for reference
when connecting the IP phone with the BToE PC application.