Way Conference Calls
You can make a 3-way conference call with two other parties.
Note:
• This section describes 3-way conferencing when Better Together over Ethernet (BToE) is
not installed.
• For details on 3-way conferencing when BTOE is installed, see Section 7.12.3.
Ø To make a 3
way conference call:
1. Call participant 1 (Tomer) and press the Conf softkey; the CONFERENCE WITH screen is
displayed:
2. Enter the number of participant 2 (Mike) and press the Dial softkey that's enabled after
entering the first digit; Mike's phone rings and then Mike answers:
3. Press the Conf softkey; a 3-way conference call is established and the numbers (or names)
of all participants are displayed on the screen:
4. To end the conference call, hang up the phone or press the End softkey.
7.9 Muting Calls
You can mute the microphone of the handset, headset, or speaker during a call so that the other
party cannot hear you. While the call is muted you can still hear the other party. Muting calls can
also be used during conference calls.
Ø To mute/unmute:
1. During a call, press the mute key:
2. To unmute, press the mute key again and resume the conversation.
To Next Page
Loading...
