1608/1616 Phone User Guide Page 151
15-601040 Issue 11c (Thursday, April 16, 2020)IP Office
Comments on this document? infodev@avaya.com
Phone Settings: Display Controls
17.7.8 Auto Show Call Waiting
By default, when you are connected on a call, the phone shows details of that call and soft key actions you can
perform for that call. In order to see details of a waiting call, you need to scroll the display using the up and down
arrow buttons.
You can opt to have the phone automatically show details of a waiting call when one alerts the phone and soft key
actions that you can perform on the waiting call. If you use the scroll keys to return the display focus to the
currently connected call, the focus automatically returns to the waiting call after a few seconds.
1. Press the Features soft key if shown.
·
To access the menu during a call, press the right arrow key or press the PHONE key and then press
the Features soft key.
2. Use the up and down arrow keys to scroll the display to the option Phone User.
3. Press the Select soft key or the OK button or the right arrow key.
4. Use the up and down arrow keys to scroll the display to the option Phone Screen Settings.
5. Press the Select soft key or the OK button or the right arrow key.
4. Use the up and down arrow keys to scroll the display to the option Show Waiting Call.
5. Press the Change soft key to change the setting or use the left or right arrow keys.
6. Select one of the following settings as desired:
·
Off - Show details of the current call only.
·
On - Automatically show the details of a waiting call.
7. Press the Done soft key.
17.7.9 Inactivity Timer (Auto Return)
You can set a timer which will return the phone to its normal call display after a set period of phone inactivity. By
default the phone will be set to auto return after 60 seconds.
Note that the timer is not applied to all menus. For example it is not applied to the A-menu and to the visual voice
menu. It is also not applied to the System Admin section of the Features menus.
1. Press the Features soft key if shown.
·
To access the menu during a call, press the right arrow key or press the PHONE key and then press
the Features soft key.
2. Use the up and down arrow keys to scroll the display to the option Phone User.
3. Press the Select soft key or the OK button or the right arrow key.
4. Use the up and down arrow keys to scroll the display to the option Phone Screen Settings.
5. Press the Select soft key or the OK button or the right arrow key.
4. Use the up and down arrow keys to scroll the display to the option Auto Return (s).
5. Press the Change soft key to change the setting or use the left or right arrow keys.
·
Off
Do not use the inactivity timer.
·
30 / 60
Apply the inactivity timer after the selected number of seconds.
6. Press the Done soft key.
To Next Page
Loading...
