Avaya 1608 - System Shutdown

1608/1616 Phone User Guide Page 175
15-601040 Issue 11c (Thursday, April 16, 2020)IP Office
Comments on this document? infodev@avaya.com
System Administration: Setting the Time Offset
20.6 System Shutdown
You can shutdown the telephone system for a specified number of minutes. Note that this is not a polite shut-down,
once you have confirmed the action, any existing calls and services using the telephone system will start being
disconnected. The telephone system will then remain unavailable for the duration you specify, the default being 10
minutes. After the shutdown duration it will take up to 5 more minutes for the telephone system to complete its
restart.
1. Press the Features soft key if shown.
· To access the menu during a call, press the right arrow key or press the PHONE key and then press
the Features soft key.
2. Use the up and down arrow keys to scroll the display to the option Phone User.
3. Press the Select soft key or the OK button or the right arrow key.
4. Use the up and down arrow keys to scroll the display to the option System Admin.
· !Note: This option is only present if you have been configured as a system phone user by your system
administrator.
5. Press the Select soft key.
6. Enter your security code (this is the same as your login code) and press the Done soft key.
7. Use the up and down arrow keys to scroll the display to the option System Shutdown.
8. Press the Select soft key or the OK button or the right arrow key.
9. The current default timeout (10 minutes) setting is shown and can be used by pressing Done soft key.
Otherwise enter the timeout required in hours and minutes and then press the Done soft key.
· The allowable range for the timeout is from 00:05 to 24:00. Note that the Done soft key is not
displayed if the timeout entered is not within the allowed range.
· To enter the : symbol in the timeout press either the * or # key.
· To delete the previous digit or character entered press the left arrow key.
10. After pressing the Done soft key, you will be asked to confirm whether you want to shutdown the telephone
system. Only proceed is you are sure. If you are not sure press the Back soft key.
11. If you press the Confirm soft key, the telephone system will switch itself to a shutdown state. This will
disconnect all current calls and services.