112
Installing an Avaya SCC1 Media Gateway Stack
October 2002
Typical DC Power Connections
Figure notes
1 Media Gateway Stack
2 DC Power Cabinet
3 White Wires
4 Green Ground Wires and Black Wires Connect to the -48 VDC Return Bus
5 -48 VDC Bus
6 Connect White Wires to Circuit Breakers
7 DC Power Cable (H600-436, G1) to Power Connector on Each Media Gateway. Cut to
Length and Crimp a Ring Terminal Onto Each Wire
8 30 Feet (9 m) Maximum
9 Route Cables Through Sliding Door
10 Circuit Breaker
11 Supplied #10-32 Screw, #10 Star Washer, and #10-32 Hex Nut
12 Inset Showing DC Power Connector (Male)
To Next Page
Loading...
