158
Coupled Bonding Conductor
October 2002
Coupled Bonding Conductor
The Coupled Bonding Conductor (CBC) connects to the single-point ground block and runs
adjacent to pairs in an associated telecommunications cable. The mutual coupling between the
bonding conductor and the pairs reduces potential differences in terminating equipment.
The conductor consists of a 10 AWG (#25) (2.5 mm
2
) wire tie-wrapped to the inside wiring
cable and terminated at the CBC terminal bar at the Main Distribution Frame (MDF). A
minimum of 12 inches (30.48 cm) spacing must be maintained between the CBC and other
power and ground leads.
The 10 AWG (#25) (2.5 mm
2
) wire must be long enough to reach the telecommunications
cables at the rear of the media gateways, follow these cables to the MDF, and to terminate at the
CBC.
To Next Page
Loading...
