Avaya S8700 - Connect External Alarm Cable

93
Installing an Avaya MCC1 Media Gateway
October 2002
Remote Power Off Cable Connections — Part 2
Connect External Alarm Cable
1 Plug the external alarm cable into the connector shown in ‘‘External Alarm Cable
Connection’’ on page 93.
2 Route the opposite end of the cable to the MDF. The alarm cable is connected to the
MDF later.
External Alarm Cable Connection
Ground
Terminal
Bar
Shunt
RPO Cable
Power Distribution Unit
TB1
To Carriers
AtoE
TB3
Auxiliary Contacts
in EP
OS
witch
2
6
Battery
Cabinet
0026_3 RBP 080196
Relay
(K1)
Connect RPO
cablehere(J21)
Connect external
alarm cable here
(J18)
Carrier
circuit
breakers
psdf002 CJL 081596
External
alarm cable
Pin 6 (-RPO)
Pin 2 (+RPO)