Avaya S8700 - Install Sneak Fuse Panels

188
Patch Cord/Jumper Installation and Administration
October 2002
Cable Routing Through Cable Slack Manager (SCC)
Install Sneak Fuse Panels
(For general information, see ‘‘Sneak Fuse Panels’’ on page 152
.)
The ‘‘Model 507B Sneak Fuse Panel’’ on page 189
, or equivalent, is recommended for sneak
current protection. The panel contains two 25-pair connectors, fuse removal tool, and fifty
220029 sneak fuses (and two spares). See ‘‘Sneak Fuse Connector Pinout’’ on page 189
for
pinout data.
1 Locate the 507B near the network interface or the Main Distribution Frame (MDF).
Figure notes
1 Top of Media Gateways
2 Cable Clamps
3 Cable Ties (Optional)
4 Power Cord
5 Cable Slack Manager
6 Cable Slack Manager (Cover
Removed)
7 Main Distribution Frame (MDF)
8 Route Cables Along Path Shown
9 Port Cables
3
5
1
2
r7
58
1
55 CJ
L
03
14
96
4