97
Installing an Avaya MCC1 Media Gateway
October 2002
High-Reliability CSS-Connected PN1 with 1 Switch Node
Figure notes
1 Media Gateway 1 (PN1 with 1 Switch Node)
2 Port Network 2 through 15
3 H600-278 Metallic Cable
4 To other port networks
Connect Critical Reliability CSS-Connected PN1
with 1 Switch Node
‘‘Critical-Reliability CSS-Connected PN1 with 1 Switch Node’’ on page 98
shows typical fiber
optic cabling between media gateways. The cable between port slots 1 and 2 on each switch
node is a metallic cable (H600-278).
Connect the 2 groups of 1 to 15 cables between PN1 and each of the other PNs in an alternating
port slot order: 20, 3; 19, 4; 18, 5; and so forth.
B
E
C
D
A
B
E
C
D
A
cadfcrr KLC 031202
To Next Page
Loading...
