127
Installing an Avaya SCC1 Media Gateway Stack
October 2002
Connect S8700 Multi-Connect configuration
Cables
1 Connect the cables for port networks (PNs) as shown in ‘‘Connections for Media
Gateway Stacks’’ on page 120.
NOTE:
The fiber optic cables are connected to the Main Distribution Frame (MDF) in ‘‘Cabling
Media Gateways’’ on page 141.
2 Connect the fiber optic cable.
The “Inter-Cabinet Cable Running List is provided with the S8700 Multi-Connect
configuration.” Each row on the list represents a cable connection. Use the running list to
determine where to connect each fiber optic cable.
!
CAUTION:
Do not route fiber optic cables and the B25A cables together.
To Next Page
Loading...
