Avaya S8700 - Connect Trunk Pairs to Media Gateway Using Jumper Wires to Establish 3-Pair Modularity

179
Patch Cord/Jumper Installation and Administration
October 2002
Connect Trunk Pairs Using Concentrator Cables
Connect Trunk Pairs to Media Gateway Using
Jumper Wires To Establish 3-Pair Modularity
‘‘3-Pair Modularity for Trunk Pairs for 1-Pair Trunks’’ on page 180
and ‘‘3-Pair Modularity for
Trunk Pairs for 3-Pair Tie Trunks’’ on page 181 show trunk pairs connected to the media
gateway with jumper wires to establish 3-pair modularity.
Figure notes
1 Trunk/Auxiliary Field
2 To Expansion Control Carrier AUX
Connector
3 Concentrator Cable (WP90929, List
1)
4 Concentrator Cable (WP90929, List
3)
5 A25D (Male-to-Male) Cable
6 Alternate Block/Rows
7 RJ21X/RJ2GX Network Interface
8 Sneak Fuse Panel
9 B25A Cable
10 Central Office Trunks
11 Media Gateway
NEW796 THC 03129
6