143
Provisioning Plan
October 2002
Provisioning Plan
A provisioning plan should be completed prior to an installation. The plan determines an
appropriate available port circuit on the S8700 Multi-Connect configuration for each telephone,
trunk, and peripheral connection needed, and any auxiliary power for Basic Rate Interface
(BRI) and certain display sets.
The Port Assignment Record must have this information:
• Station or trunk type or feature/service
• Building location (floor/room/desk/outlet)
• Extension number or trunk group and member number
• Port circuit location on the S8700 Multi-Connect configuration for each endpoint (media
gateway/carrier/slot/circuit)
• Route from equipment room through equipment closets to each endpoint
• Auxiliary power supply, if required
To Next Page
Loading...
