150
Main Distribution Frame Labels
October 2002
Main Distribution Frame Labels
‘‘Label Graphic Symbols and Nomenclature’’ on page 150 shows the graphic symbols used on
labels for the S8700 Multi-Connect configuration, cross-connections, information outlets, and
cables. The labels are color-coded to identify S8700 Multi-Connect configuration wiring:
• Green — To Central Office (CO)
• Purple — To S8700 Multi-Connect configuration ports
• Yellow — To auxiliary equipment and miscellaneous S8700 Multi-Connect
configuration leads
• Blue — To information outlets
• White — From Main Distribution Frame to satellite locations (3-pair)
Each label identifies 2 rows on the terminal block. The upper half identifies the row above it
and the lower half identifies the row below it. The labels are inserted into the clear plastic
designation strips furnished with the terminal blocks. The strip is snapped in place between the
terminal block rows. Label code number 1220A (comcode 103970000) contains all of the
required labels.
Label Graphic Symbols and Nomenclature
Figure notes
1 Write Floor or Building Identification on
Label as Required
2 Media Gateway
3 Carrier
4 Slot
5 Information Outlet
6 Site/Satellite Closet
7 Tie Circuit
8 Floor
9 Building
r758422i LJK 050996
To Next Page
Loading...
