192
Patch Cord/Jumper Installation and Administration
October 2002
Coupled Bonding Conductor
Figure notes
1 25-Pair Tip & Ring Cables to Media
Gateways
2 Coupled Bonding Conductor (CBC)
Terminal Block
3 Tie Wraps
4 Cable Shield or Six Spare Pairs
5 Ground on Carbon Block Protector or
Equivalent
6 Trunk Cable to Network Interface
7 10 AWG (#25) (2.5 mm
2
) Wire
8 To Network Media Gateways
9 Battery Plant Ground Discharge Bar
for Single-Point Ground
10 Cross-Connect Ground Block
11 Main Distribution Frame (MDF)
12 To Other Cross-Connect Ground
Blocks
13 Approved Ground
14 Coupled Bonding Conductor (CBC)
cbc_gnd_1 PDH 062696
To Next Page
Loading...
