Avaya S8700 - Page 6

6
Installing the S8700 Multi-Connect
Contents
October 2002
Configure SNMP Traps 41
Disconnect from media server 1 42
• Connect Duplication Cables 43
Collocated media servers 43
Separated media servers 43
• Configure Media Server 2 43
Verify Software Version 44
Set server configuration type 45
Upgrade media server software (if necessary) 45
Continue server 2 configuration 46
Copy settings 46
Configuring manually 46
Update System 47
Verify Media Server 2 Connection to Customer’s
LAN (if provided) 47
Test Media Server 2 LEDs 48
Busy Out Standby Media Server 49
Disconnect from the Media Server 49
• Connect UPS Ethernet Cables to Ethernet Switch 50
• Configure the UPSs 51
Duplex Reliability Configurations 53
High/critical reliability configurations 53
• Configure the Avaya Ethernet Switch (if used) 55
• Customizing the Active Media Server 57
Set up Avaya Site Administration 57
Directly through a dedicated services port 57
Remotely over the network 58
Starting Avaya Site Administration 58
Input Translations 59
Reset Media Server 59
Add Media Gateways 59
Administer and Enable the IP Media Server Interface 60
Add IPSI Translations to MultiVantage Software 61
• Install the Media Gateways 63
• Installing an Avaya MCC1 Media Gateway 64
Unpack and Inspect Media Gateway 65