5-16 Cruise / Enroute
the drop down list. Scroll up or down the dropdown list as
required and push one of the knobs to insert a hold flight plan leg.
DELETING A HOLDING PATTERN
To delete a holding pattern in your flight plan, use the “FMS”
keyboard knob or the right MFD knob to scroll as required to
create an edit cursor surrounding the holding leg, then press the
“Delete Hold” LSK.
EDITING A HOLDING PATTERN
Position an edit cursor around the holding leg of interest in your
flight plan. Use the inner ring of the MFD knob or the “FMS” knob
on the keyboard to highlight the desired field (e.g. turn direction,
leg length, leg units, inbound leg course) and make your edit. Any
changes made will immediately be applied.
COOL FEATURE
Graphical Flight Plan Leg Each leg of a flight plan
is capable of displaying a graphical representation
of the leg. This is especially useful for procedure
turns and holding patterns.
To Next Page
Loading...
