6-6 Arrivals / Approaches / Landing
Procedures Brackets
COOL FEATURE (FMS900W ONLY)
PROC button The “PROC” function key on the
keyboard acts as a shortcut for attaching a
published arrival or approach procedure to a
waypoint in your flight plan. It can be used at any
time. The first press of the function key results in the
MFD displaying the “Flight Plan” tab of the FMS
page with the Approach field of the next destination
after the active leg highlighted in reverse video and
a drop down box of available published approaches
listed. Pressing it a 2nd time will step the reverse
video over the Arrival field and present a drop down
box of available published arrivals. Each
subsequent press of the “PROC” key will step
through all following destination airfields approaches
and arrivals in the flight plan and wrap back around
to the top of the flight plan. When you’ve got the
drop down box over the intended field, use either
the “FMS” knob on the keyboard or the right-hand
To Next Page
Loading...
