Banner Q5X - Page 8

July 25, 2023
Q5X With Dual Discrete Outputs And IO-Link Instruction Manual


8
Press and hold for longer than 2 seconds to start the currently
selected TEACH mode (the default is two-point TEACH)
(+)(CH1/CH2)
PresstonavigatethesensormenuinSetupmode
Press to change setting values; press and hold to increase
numeric values
Press and hold for longer than 2 seconds to switch between
Channel 1 and Channel 2
(-)(MODE)
Press to navigate the sensor menu in Setup mode
Press to change setting values; press and hold to decrease
numeric values
Press and hold for longer than 2 seconds to enter Setup mode
NOTE: Whennavigatingthemenu,themenuitemsloop.
© Banner Engineering Corp.