Basler A500k Series iii
PRELIMINARY
Index
A
area of interest
explained 3-34
setting with binary commands 4-17, 4-18
with the SXGA monitor output 3-37
area of interest stamp
explained 3-36
setting with binary commands 4-19
asynchronous timing 3-7
B
binary command frame 4-6
binary commands
error checking 4-6, 4-7
examples 4-9
explained 4-5
read command 4-7
timeouts 4-7
write command 4-8
bitrate
setting with binary commands 4-29
block check character
calculating 4-10
defined 4-6
block diagram 3-3
C
cable
Camera Link 2-8
length 2-8
power 2-8
specification 2-8
type 2-8
camera configuration tool
auto refresh 4-3
closing the tool 4-2
opening the tool 4-2
parameter description window 4-3
refresh button 4-3
selecting a port 4-3
Camera Link 2-9
implementation 2-9
receiver 2-9
transmitter 2-9
cleaning the camera and sensor 1-7
CMOS-sensor 3-1
color creation 3-28
commands
see binary commands
configuration sets
explained 3-41
manipulating with binary commands 4-25, 4-26
configuration tool
see camera configuration tool
configuring the camera
with binary commands 4-5
with the config tool 4-2
conformity 1-3
D
data output mode
see video data output mode(s)
digital responsivity
explained 1-4
spec 1-2
digital shift
explained 3-31
setting with binary commands 4-16
digital shifter 3-1
dimensions
camera 5-1
F-mount adapter 5-3
DSNU 1-2
dynamic area of interest
explained 3-36
setting with binary commands 4-19
E
edge-controlled exposure mode
explained 3-4
EEPROM firmware version
viewing with commands 4-23
environmental requirements
camera 1-6
ExFlash 2-22
ExFlash input signal 2-12
exposure time
relation to exp.time control modes 3-4–3-6
exposure time control mode(s)
explained 3-4–3-6
setting with binary commands 4-11
ExSync signal
explained 2-12, 3-4
ExSync, level-controlled mode with asynchronous
timing 3-9, 3-12
ExSync, level-controlled mode with synchronous ti-
ming 1 3-10, 3-14
ExSync, level-controlled mode with synchronous ti-
ming 2 3-11, 3-15
ExSync, level-controlled mode with synchronous/
asynchronous timing 3-13
ExSync, progammable mode with synchronous ti-
ming 1 3-19
ExSync, programmable mode with ssynchronous ti-
ming 3-16, 3-17
ExSync, programmable mode with synchronous ti-