AW00123409000 Image Acquisition Control
Basler ace USB 3.0 139
6.5 Setting the Exposure Time
This section describes how the exposure time can be adjusted "manually", i.e., by
setting the value of the ExposureTime parameter.
The camera also has an Exposure Auto function that can automatically adjust the
exposure time. Manual adjustment of the ExposureTime parameter will only
work correctly if the Exposure Auto function is disabled.
For more information about auto functions in general, see Section 7.15 on
page 294.
For more information about the Exposure Auto function in particular, see
Section 7.15.5 on page 304.
To Next Page
Loading...
