Tools for Changing Camera Parameters AW00123409000
62 Basler ace USB 3.0
3.1.2 pylon USB Configurator
The pylon USB Configurator is included in the Basler pylon Camera Software Suite besides the
Basler pylon IP Configurator and the Basler pylon Camera Link Configurator. The pylon USB
Configurator is a standalone application. It allows you to
obtain information about the architecture of the device tree to which your camera is connected
and about the USB devices, including your camera
automatically generate support information for Basler technical support.
For more information about generating support information, see Section 8.3 on page 351.
For more information about using the pylon USB Configurator, see the Installation and Setup Guide
for Cameras Used with Basler pylon for Windows (AW000611).
3.1.3 pylon SDKs
Three pylon SDKs are part of the Basler pylon Camera Software Suite:
pylon SDK for C++ (Windows and Linux)
pylon SDK for C (Windows and Linux)
pylon SDK for .NET / C# (Windows)
Each SDK includes an application programming interface (API), a set of sample programs, and
documentation:
You can access all of the camera’s parameters and control the camera’s full functionality from
within your application software by using the matching pylon API (C++, C, or .NET).
The sample programs illustrate how to use the pylon API to parameterize and operate the
camera.
For each environment (C++, C, and .NET), a Programmer's Guide and Reference
Documentation is available. The documentation gives an introduction to the pylon API and
provides information about all methods and objects of the API.
To Next Page
Loading...
Need help?
General
