Revision History AW00123409000
354 Basler ace USB 3.0
Revision History
Doc. ID Number Date Changes
AW00123401000 04 Jun 2013 Initial release of the document. Applies to prototypes only.
AW00123402000 16 Apr 2014 First release of this document for series cameras and some prototype
cameras.
Updated Asian contact information.
Updated names throughout the manual related to the release of the Basler
pylon 4 Camera Software Suite.
Included information throughout the document about the following cameras:
acA640-90um/uc, acA1920-25um/uc (series cameras)
acA2000um/umNIR/uc, acA2040-80um/umNIR/uc, acA3800-14um/uc,
and acA4600-10uc (prototype cameras).
Replaced "pixel data format" by "pixel format" throughout the document.
Replaced "pixel size" by "pixel edge length" in Section 1.2 on page 2.
Added information about the CS-mount in Section 1.2 on page 2.
Added "Mounting Instructions" as Section 1.5 on page 41,
Updated the LZ4 license text in Section 1.7 on page 44.
Modified Section 1.9.2 on page 46 to better avoid EMI problems.
Expanded the precautions about avoiding dust on the sensor, about using
the correct plug, and about cleaning properly in Section 1.10 on page 47.
Added a reference to the "Recommended Components
for Basler USB 3.0 Cameras" document in Section 2 on page 43.
Added a reference to cable documentation in Section 5.5 on page 56.
Added the following sections:
Section 5.10 on page 71
Section 5.11.2 on page 79
Section 5.12 on page 82
Section 5.13 on page 92
Section 6 on page 99
Section 7 on page 179
Section 8 on page 197
Described how to use the Basler pylon USB Configurator for contacting
Basler technical support in Section 9.3 on page 308.
AW00123403000 05 Sep 2014 Internal release.
AW00123404000 17 Jun 2015 Minor additions and corrections throughout the manual relating to former
prototype cameras.
Added information for former prototype cameras: acA2000-165,
acA2040-90, acA3800-14 and acA4600-10 throughout the manual.
Added new prototype cameras: acA645-100um/uc, acA1920-155um/uc.
Replaced "lens adapter" by "lens mount" and "cylindric housing extension"
throughout the manual.
Added precautions related to SELV/LPS requirements for power supplies in
Section 1 on page 1 and Section 5 on page 53.