Basler acA2040-55 User Manual

AW00123409000 Installation
Basler ace USB 3.0 59
2 Installation
The information needed for installing the camera and related software is included in the Installation
and Setup Guide for Cameras Used With pylon for Windows (AW000611).
You can download the document from the Basler website: www.baslerweb.com
Drivers and Tools for changing camera parameters are indicated in the next chapter.
DANGER
Electric Shock Hazard
Risk of Burn or Death.
The power supplies used for supplying
 power to the I/O lines and
 camera power
must meet the Safety Extra Low Voltage (SELV) and Limited Power Source (LPS)
requirements.
If you use a powered hub as part of the USB 3.0 connection, the powered hub
must meet the SELV and LPS requirements.
WARNING
Fire Hazard
Risk of Burn
The power supplies used for supplying
 power to the I/O lines and
 camera power
must meet the Limited Power Source (LPS) requirements.
If you use a powered hub as part of the USB 3.0 connection, the powered hub
must meet the LPS requirements.
The camera is designed to be connected to a USB 3.0 port installed in your
computer. When connected to a USB 2.0 port, the Basler ace USB 3.0 camera will
be detected but will not operate.

Basler acA2040-55 Specifications

General

Brand	Basler
Model	acA2040-55
Category	Digital Camera
Language	English