Specifications, Requirements, and Precautions AW00123409000
56 Basler ace USB 3.0
1.12 Precautions
DANGER
Electric Shock Hazard
Risk of Burn or Death.
The power supplies used for supplying
power to the I/O lines and
camera power
must meet the Safety Extra Low Voltage (SELV) and Limited Power Source (LPS)
requirements.
If you use a powered hub as part of the USB 3.0 connection, the powered hub
must meet the SELV and LPS requirements.
WARNING
Fire Hazard
Risk of Burn
The power supplies used for supplying
power to the I/O lines and
camera power
must meet the Limited Power Source (LPS) requirements.
If you use a powered hub as part of the USB 3.0 connection, the powered hub
must meet the LPS requirements.
NOTICE
Voltage outside of the specified range can cause damage.
You must supply camera power that complies with the Universal Serial Bus 3.0 specification.
The camera’s nominal operating voltage is +5 VDC, effective on the camera’s connector.
To Next Page
Loading...
Need help?
General
