AW00123409000 Specifications, Requirements, and Precautions
Basler ace USB 3.0 49
1.11 Environmental Requirements
1.11.1 Temperature and Humidity
Housing temperature during operation: 0 °C ... +50 °C (+32 °F ... +122 °F)
Housing temperature during operation
for acA2000-165 and acA2040-90 only: 0 °C ... +60 °C (+32 °F ... +140 °F)
Humidity during operation: 20 % ... 80 %, relative, non-condensing
Storage temperature: -20 °C ... +80 °C (-4 °F ... +176 °F)
Storage humidity: 20 % ... 80 %, relative, non-condensing
Temperature Measuring Spot
You must determine the camera housing temperature on a specific measuring spot. Its location on
the camera housing is indicated in the figure below.
Fig. 32: Location of the Housing Temperature Measuring Spot on the Camera Housing
Housing temperature according to UL 60950-1: max. 70 °C (+158 °F)
Ambient temperature according to UL 60950-1: max. 30 °C (+86 °F)
UL 60950-1 test conditions: no lens attached to the camera and without efficient heat
dissipation; ambient temperature kept at 30 °C (+86 °F).
Housing temperature
measuring spot