AW00123409000 Specifications, Requirements, and Precautions
Basler ace USB 3.0 39
1.6 Mechanical Specifications
The camera housing conforms to protection class IP30 assuming that the lens mount is covered by
a lens or by the plastic cap that is shipped with the camera.
1.6.1 Camera Dimensions and Mounting Points
The dimensions in millimeters for cameras equipped with a C-mount are as shown in Figure 26. The
dimensions in millimeters for cameras equipped with a CS-mount are as shown in Figure 27.
Note that some camera models are not available with CS-mount. For details, see Section 1.3.2 on
page 8.
Camera housings are equipped with mounting screw holes on the bottom as shown in the drawings.
For mounting instructions, see Section 1.7 on page 44.
To Next Page
Loading...
