AW00123409000 Features
Basler ace USB 3.0 293
8. The color fidelity should now be quite good. If you want to make additional changes, adjust the
hue and saturation by using the color adjustment feature. Keep in mind that when you adjust a
color, the neighboring colors up to the nearest secondary or primary colors will also be affected
to some degree (see the color hexagon in Section 7.14.3.4 on page 286). For example, when
you adjust red, yellow and magenta will also be affected.
When you are making hue and saturation adjustments, it is a good idea to start by concentrating
on one line in the color chart. Once you have the colors in a line properly adjusted, you can
move on to each of the other lines in turn.
9. If available for your camera model, reduce noise in the image and enhance its sharpness by
enabling the PGI Feature Set. If you desire a stronger effect, carry out further adjustments by
using the related parameters.
For Information about the PGI feature set, see Section 7.14.3.2 on page 281.
When you first start working with the color enhancement tools, it is easy to badly
misadjust the color adjustment settings and not be able to bring them back into
proper adjustment. You can reset the parameter settings by camera reset or power
up.
Certain conditions outside the camera, such as the lighting, the camera lens, filter
or the monitor settings are relevant to the reproduction of color in the image. If you
change any of these conditions you will have to repeat the above procedure to
preserve optimum color reproduction.
To Next Page
Loading...
Need help?
General
