Physical Interface AW00123409000
78 Basler ace USB 3.0
DANGER
Electric Shock Hazard
Risk of Burn or Death.
The power supply used must meet the Safety Extra Low Voltage (SELV) and
Limited Power Source (LPS) requirements.
A suitable power supply is available from Basler. Contact your Basler sales
representative to order a power supply.
WARNING
Fire Hazard
Risk of Burn
The power supply used must meet the Limited Power Source (LPS) requirements.
A suitable power supply is available from Basler. Contact your Basler sales
representative to order a power supply.
NOTICE
Applying incorrect electrical signals to the camera’s GPIO lines can severely damage the camera.
1. Before you connect any external circuitry to a GPIO line, we strongly recommend that you
set a GPIO line to operate as an input or as an output (according to your needs).
2. Once a line is properly set, make sure that you only apply electrical signals to the line that are
appropriate for the line’s current setting.
Direct-coupled GPIO lines have the advantage of working with very short delays
compared to opto-isolated I/O lines.
The direct-coupled GPIO lines are, however, distinctly more susceptible to
electromagnetic interference.
We therefore strongly recommend to only use the direct-coupled GPIO lines when
significant electromagnetic interference will not occur.
To Next Page
Loading...
Need help?
General
