X300 (SELV/PELV) Connection method
Signal bus BM50XX
BM51XX
BM53XX
Configured cable
Electrical connections
Instruction handbook b maXX 5000
Document No.: 5.09021.16 Baumüller Nürnberg GmbH
170
of 328
7.14
(max. allowable number of axis units: 12)
Notes for the laying of the signal bus cable:
Figure 83: Laying of the signal bus cable
1 Fix the ribbon cable bracket at the first unit from the left side always on this place. Rib-
bon cable leftover as a loop between the rib
bon cable bracket and the connector.
2 Fro
m the second unit from the left side on fix the ribbon cable bracket always on this
place.
Ribbon cable bracket see ZSpar
e parts– as from page 282.
To Next Page
Loading...