37 Installation into the circulation system
Depending on the maintenance method chosen, install PoolManager
®
on the circulation system as follows.
37.1 PoolManager
®
Chlorine installation diagram
1. PoolManager
®
Chlorine
2. Heat exchanger/Heating
3. Sand filter
4. Circulation pump
5. pH-minus / pH-plus
6. sodium hypochlorite
37.2 PoolManager
®
Oxygen installation diagram
1. PoolManager
®
Oxygen
2. Heat exchanger/Heating
3. Sand filter
4. Circulation pump
5. pH-minus / pH-plus
6. Bayrosoft
®
37.3 PoolManager
®
Bromine installation diagram
1. PoolManager
®
Bromine
2. Heat exchanger/Heating
3. Sand filter
4. Circulation pump
5. Magnet valve
6. pH-minus / pH-plus
7. Brominator
37.4 PoolManager
®
PRO installation diagram
1. PoolManager
®
PRO
2. Heat exchanger/Heating
3. Sand filter
4. Circulation pump
5. pH-minus / pH-plus
6. sodium hypochlorite
To Next Page
Loading...
