EasyManua.ls Logo

Beam ECG - Technical Data

Beam ECG
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
Beam
®
, Operating Manual, Rev. 4.6.1 01/2016, GmbH
3. Product Description
3
3.7 Technical Data
Conduction: 3-channel
Frequency Range: Event: 0.3 Hz - 75 Hz
Loop: 0.1 Hz - 75 Hz
Sampling Rate: 200 Hz
A/D Resolution: 12 Bit
Input Impedance: 9 MΩ
Sensitivity: 5 mV
Event Case Electrodes: 4 Ag/AgCl on the reverse of the Beam
®
Loop/Event cable single-
use electrodes:
cable connector for 4 standard single-use electrodes
Ag/AgCl
Event Period: adjustable (15 sec to 3 min)
Loop Period: Time before activation: 15 sec to 3 min (in 15 sec inter-
vals)
Time after activation: 15 sec to 3 min (in 15 sec inter-
vals)
Recordable Events: dependent from the set event period
Event Transmission
(e-health):
Via Mobile (GPRS) after each reading
Memory Capacity 16Mbit
maximum of 28 minutes
Battery Capacity: Event-Mode: 40 days at BT-transmission
46 without, for 5 events at 15 seconds
each per day
Loop-Mode: 10 days for BT-transmissions
for 5 events at 15 seconds each per day
Streaming: 7 hours of permanent transmission
Operating Temperature: +10°C to +45°C
Operating Humidity: 10% to 95%
Storage Environment: -20°C to 50°C and 10% to 95% humidity
Dimensions: 91 x 67 x 25 mm
Weight: ca. 102g including batteries
Power: 1 Alkali 1,5 V Battery ( AAA, LR03, Micro)
Interfaces: Bluetooth (Class 2 / 30 m)
Writing Speed: mm/sek adjustable in the HMS CS
Summer/Winter time no automatic adjustment

Table of Contents