EasyManua.ls Logo

Beam ECG - Installation for Windows

Beam ECG
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
Beam
®
, Operating Manual, Rev. 4.6.1 01/2016, GmbH
Hypertension-Management-Software
Client-Server
®
4
4) Bluetooth
Bluetooth USB Adapter
Bluetooth 2.0
USB Version 1.1 or higher
No BlueSoleil drivers must be installed!
Tested USB adapter:
- Gigabyte GN-BT03D
Windows XP SP2:
automatic installation with Microsoft Stack
- DIGITUS
Windows XP SP2:
automatic installation with Microsoft Stack
- ANYCOM USB-200 or USB 250 Blue USB Adapter
Windows XP, Windows XP SP2:
Installation of provided driver for the Windows XP Bluetooth Stack or
Installation of the provided Bluetooth Software BTW 5.1
Windows 2000, XP, Mac OS X 10.4 or newer:
Installation of the provided Bluetooth Software BTW 5.1
GNU/Linux 2.4, GNU/Linux 2.6 with BlueZ or Affix Bluetooth Stack:
no installation necessary
4.2.2 Installation for Windows
®
Note: Please only plug the Bluetooth-Adapter into the computer after the software
installation or when you are prompted to do so.
Important: If you are using the USB interface and/or Bluetooth then please first
install the respective drivers.
Procedure:
1) Install application from CD-ROM.
2) If required install drivers from CD-Rom in the following sequence
- first the Bluetooth driver,
- next the USB driver.
3) Plug USB adapter and/or Bluetooth adapter into computer.
Install application from CD-ROM
Put the provided CD into your CD-ROM driver.
Usually the installation program will start automatically. If not (autorun function
is disabled), then
open the CD-ROM-drive in Windows Explorer and
click on the file CD_Start.exe in order to start the installation.
Select your language.
In the installation menu click on HMS CS

Table of Contents