Beam ECG - Blood Pressure Thresholds (Only for the ABDM Measuring Device Mobil-O-Graph)

58
Beam
®
, Operating Manual, Rev. 4.6.1 01/2016, GmbH
Hypertension-Management-Software Client-Server
®
4
► Click on .
A Note appears: Pairing successful.
► Click on
.
► Click on
.
The new device will be displayed in the Interfaces window under the Bluetooth
tab in the interface list.
Delete measuring device from list
► Click on the interface of the measuring device to be removed.
► Click on
.
► Answer the prompt with
.
The device disappears from the list.
Save interfaces
In order to apply the specified information,
► click on
.
The Interfaces window disappears.
4.13.5 Blood Pressure Thresholds (only for the ABDM Measuring device Mobil-O-Graph)
You can specify global thresholds for systolic and diastolic blood pressure. Upon
exceeding the threshold the measured values will be marked accordingly in the
analysis.
These values will be automatically saved as thresholds for new created patients.
Note: You can specify blood pressure thresholds for each patient individually under
the Patient Information tab (see 4.6, Modify Patient Information).
Specify thresholds for analysis
► In the taskbar click on Settings and then on Blood Pressure Thresholds.
The Blood Pressure Thresholds window appears.