PN 177196BB
vi
CONTENTS
3.4 SYSTEM SETUP OPTIONS,3-9
3.5 CONFIGURATION SAVE AND RESTORE SETUP OPTIONS,3-13
3.6 OPERATORS SETUP OPTIONS,3-14
3.7 FLAGGING SETS SETUP OPTIONS,3-16
4 QUALITY ASSURANCE,4-1
4.1 SETTING UP OR MODIFYING CELL CONTROL FILES,4-1
4.2 ANALYZING CELL CONTROLS,4-3
4.3 INTERPRETING AND USING CELL CONTROL DATA,4-9
4.4 CONTROL DATA MANAGEMENT,4-13
4.5 INTERLABORATORY QUALITY ASSURANCE (IQAP),4-14
4.6 REPRODUCIBILITY AND CARRYOVER CHECKS,4-15
4.7 SETTING UP XB/XM,4-17
4.8 INTERPRETING AND USING THE XB/XM DATA,4-20
5 CALIBRATION,5-1
5.1 CALIBRATION OVERVIEW,5-1
5.2 PRELIMINARY CALIBRATION CHECKS/PROCEDURES,5-2
5.3 AUTO-CALIBRATION,5-3
5.4 MANUAL CALIBRATION,5-7
6 SAMPLE ANALYSIS,6-1
6.1 SPECIMEN HANDLING,6-1
6.2 SAMPLE IDENTIFICATION,6-3
6.3 PATIENT/SAMPLE INFORMATION,6-6
6.4 WORKFLOW OPTIONS,6-12
6.5 SAMPLE ANALYSIS IN THE AUTOLOADER MODE,6-14
6.6 SAMPLE ANALYSIS IN THE MANUAL MODE,6-16
6.7 RUN-IN-PROGRESS, RESULTS LIST, AND RESULTS SCREENS,6-18
6.8 AUTOMATIC AND MANUAL SPECIMEN RERUNS,6-23
6.9 MANUAL MATCHES,6-24
To Next Page
Loading...
