Bentel Security KYO 4M User Manual

23

Operating from a Keypad
Turning ON your System Automatically
Your installer may have set up your system to turn ON at a pre-set time. The En./
Dis. Auto-Arm option will allow you to enable/disable the automatic-arming fun-
ction.
To Enable/Disable Auto-Arm at an LCD keypad, proceed as follows:
1. From the Main User Menu, using key
C or D,
scroll the menu for the Auto-Arm En/Dis. option,
then press
ENTER.
2. Press
ON to enable or OFF to disable the Auto-
Arm option.
3. Press
ENTER to confirm and go back to step 1.
To enable/disable Auto-Arm function from an LED Keypad, proceed as follows:
1. Access the Main User Menu.
Code PIN + ENTER
The P indicator will blink.
2. Press 1 to toggle the status — Enable Ö Disable (refer to Table 11).
3. Press ENTER to confirm, or ESC to quit and, in both cases, exit the Menu.
USER MENU ßà
En/Dis. Auto-Arm
En/Dis. Auto-Arm
ON <OFF>
LCD Keypads
LED Keypads

/(' 0HDQLQJ

.



   

Bentel Security KYO 4M Specifications

General

Brand	Bentel Security
Model	KYO 4M
Category	Control Unit
Language	English