Bentel Security KYO 4M User Manual

28
Multifunction Control Panel

Programming Telephone Numbers
(Not available for KYO16D series). This option will allow you to change/delete
the telephone numbers (usually programmed by the installer).
To change/delete a phone number from an LCD keypad, proceed as follows:
1. From the Main User Menu, using key
C or D,
scroll the menu for the Program Tel. Num. op-
tion, then press
ENTER.
2. Using key
C or D, scroll the ‘Phonebook’ for the
required phone number (only the ‘Voice’ related
phone numbers assigned to the User code concer-
ned will be shown), then press
ENTER to change, or ESC to delete the
selected phone number and step back to the Main User Menu.
3. If you press
ENTER at step 2., the display will
show the the selected telephone number field.
To enter a new telephone number, use keys:
A ... B to move the cursor
ON ... OFF to enter ‘
,,
,,
,’ (for 2 second pauses), ‘*’ or ‘#’.
4. Press ENTER to confirm the new telephone number, or the ESC key to
quit and, in both cases, go back to step 2.
NOTE: This option is available only when:
a) The User code, keypad and telephone numbers are assigned to the
partition concerned.
b) The telephone numbers have the ‘Voice’ attribute.
This option is not available on LED keypads.
USER MENU ßà
Program Tel.Num.
Program Tel.Num.
Office 1
Office 1
0780____________
LCD Keypads
LED Keypads
Changing Telephone
Numbers

Bentel Security KYO 4M Specifications

General

Brand	Bentel Security
Model	KYO 4M
Category	Control Unit
Language	English