41
Using Digital Keys and Cards
Disarm (Turning OFF your system)
This operation will Disarm all the Partitions controlled by the Digital Key/Card and
Reader in use.
To Disarm the System (all LEDs OFF), proceed as follows:
1. Put the SAT Key into the ECLIPSE Reader, or hold the proximity Key/Card
near the sensitive field of the PROXI Reader — until all the LEDs turn OFF
(see Figure 8a).
2. Remove the Key/Card to Disarm the System.
Arm — Global Mode (Turning ON your system)
This operation will Arm all the Partitions controlled by the Digital Key/Card and
Reader in use.
To Arm the System in Global Mode (Red LED ON), proceed as follows:
1. Put the SAT Key into the ECLIPSE Reader, or hold the proximity Key/Card
near the sensitive field of the PROXI Reader — until the Red LED turns ON
(see Figure 8b).
2. Remove the Key/Card to Arm the System in Global Mode.
To Next Page
Loading...
